The Beall Tool Company Established 1982

The Beall Wood Buff

The Wood Buff Wood buffing has been used by pipemakers to polish their briars for years. We first became intrigued by the process when we saw the impressive results it produced in our own shop, and soon afterwards decided to offer the necessary components in our catalog. Wood buffing wheels are similar to the metal buffing versions, but softer and looser, to conform to the contours of the work without blurring the detail. Since the buffing process adds nothing to the surface of the wood except a thin coat of carnauba wax - a non-toxic edible substance - wood buffing is a particularly good choice for toys or pieces which are intended to contain food items.

Since its introduction, the Wood Buff kit has gained a multitude of admirers - especially among turning enthusiasts. Its ease of use, coupled with the sheen it produces, makes it a particularly elegant solution to many finishing dilemmas. The Wood Buff may be attached to a 1725 r.p.m. stationary motor, a wood lathe, or a multi-purpose shop tool. And, although it was designed to polish smaller items, it can be adapted to large surfaces such as tabletops by powering it with a variable speed sander/polisher unit of the type used for auto refinishing. The Wood Buff Kit includes a Combination 1/2" - 5/8" Adaptor, one end of which attaches to your motor shaft where it is held in place by set screws. The other end is internally threaded to accept the bolts installed in the center of each buffing wheel, enabling you to change wheels quickly during the buffing process.

For a video showing how to use the Wood Buff, please see the instructions page.

8" Wood Buffs with 3/4" Holes

For those of you who have stationary buffing machines or grinders, we also offer the 8" Wood Buff Wheels with a 3/4" center hole. Since these wheels are minus the hardware and adaptor used with our original wheels, they will also cost you less.

The Wood Buff is designed to be used with a 1/3 hp or more, 1725 motor. This should be sufficient for most buffing tasks; larger items or a more vigorous buffing style may call for 1/2 hp. The 3,000 r.p.m. of most grinder motors will be too fast for the 8" wheels sold with the Wood Buff but would work well for buffing with our smaller 4" Wheels or Bowl Buffs. When you face the shaft end of the motor, the wheel should rotate counter-clockwise in order for the Wood Buff to work properly.

The Wood Buff Kit (consists of three 8" buffing wheels with center bolts for quick change, a combination 1/2" - 5/8" adaptor, two buffing compounds, one bar of Carnauba Wax and instructions. The wheels with hardware have a 3/8" center hole.) Add to Cart $85.00
8" Tripoli Wheel, 3/8" Center Hole, with Hardware(each) Add to Cart $19.90
8" White Diamond Wheel, 3/8" Center Hole, with Hardware(each) Add to Cart $19.90
8" Wax Wheel, 3/8" Center Hole, with Hardware(each) Add to Cart $19.90
4" Wheel Kit Add to Cart $56.00
4" Tripoli Wheel (each) Add to Cart $10.50
4" White Diamond Wheel (each) Add to Cart $10.50
4" Wax Wheel (each) Add to Cart $10.50
Set of Three 4" Wheels Add to Cart $29.00
Buffing Combination 1/2" - 5/8" Adaptor (right-hand threads only) Add to Cart $21.00
Tripoli Bar Add to Cart $5.10
White Diamond Bar Add to Cart $6.25
Carnauba Wax Bar (T1) Add to Cart $6.40
3/4" Hole Wood Buff Kit (three 8" wheels with 3/4" holes only, two compounds & wax) Add to Cart $68.00
8" Tripoli Wheel with 3/4" Hole Only Add to Cart $19.50
8" White Diamond Wheel with 3/4" Hole Only Add to Cart $19.50
8" Wax Wheel with 3/4" Hole Only Add to Cart $19.50
Morse Taper #1 or #2 (Please Specify)
The Buffer Rake Add to Cart $12.00
Call Toll Free 1-800-331-4718 (9am - 5pm Est) Friendly Helpful Service Guaranteed
Copyright © The Beall Tool Company 2008 - 2022

Beall Tool Company, The BBB Business Review